◆The MH2 series has three test modes:
Manual speed adjustment, manual setting speed, automatic cycle speed
◆Range: 1000N (about 100kgf) travel: 235mm
◆Speed 10-300mm/min
◆Functions: can display speed, adjust the limit of stroke left and right, prevent overload setting, timing setting, counting or setting test frequency (Max 65535), etc
◆Optional: encoder, MTA meter (with length), speed change, length control, power control.
◆Application: testing of various materials in 1000N
* a special test system for compression test, tensile test (stretching), volume edge test, stripping test, friction test, etc.
* analyze the breaking point and free fitting of mechanical parts.
◆The motor and controller are all adopted by Japan Oriental motor
◆voltage: AC100-240V
◆Weight: 14Kg
Operation panel：
Basic operation：
Adjustment speed |
| The test speed is easy to adjust and dial. Set the resolution: [10 -20mm/min: 0.5 mm/min] [20 -100mm/ min: 5mm / min] [100 -300mm/ min: 10mm / min] Adjustable speed type: start, measure, return |
Three measurement modes |
| There are three test modes to meet your needs. Manual mode: move and press the up/down button Jogging mode: dial (approx: 0.05 mm per turn) Cycle mode: cycle between travel limit switches |
Loop mode |
| Loop mode allows the number of tests to be set to Repeat and pause time. Repeated number of tests: Max . 65535 times the timer Pause time: up to 99 minutes 59 seconds |
Setting mode |
| Function setting mode Starting speed, measuring speed, return speed Pause time, number of cycles, extra configuration mode |
DIMENSION ：
